Cisco Nexus 7000 Series - Page 730

V Commands
version 9
702
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
version 9
To specify the export version 9 and enter the export version configuration mode, use the version 9
command.
version 9
no version 9
Syntax Description This command has no arguments or keywords.
Defaults Flow exporters are not present in the configuration until you create them.
Command Modes Flow export configuration
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines Flow exporters export the data in the flow monitor cache to a remote system, such as a server running
NetFlow collector, for analysis and storage. Flow exporters are created as separate entities in the
configuration. Flow exporters are assigned to flow monitors to provide data export capability for the flow
monitors. You can create several flow exporters and assign them to one or more flow monitors to provide
several export destinations. You can create one flow exporter and apply it to several flow monitors.
Once you enter the flow exporter configuration mode, the prompt changes to the following:
switch(config-flow-exporter)#
Within the flow exporter configuration mode, you can enter the version 9 keywords. Once you enter the
version 9 keywords, the prompt changes to the following:
switch(config-flow-exporter-version-9)#
When entering the no form of this command, the seconds argument is optional.
This command does not require a license.
Examples This example shows how to specify the name of the flow exporter that is created or modified.
switch(config)# flow exporter flow-export-test
switch(config-flow-exporter)# version 9
switch(config-flow-exporter-version-9)#
Release Modification
4.0(1) This command was introduced.