Cisco Nexus 7000 Series - Page 594

Show Commands
show ntp internal
566
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Examples This example shows how to display the NTP internal information:
switch(config)# show ntp internal module-info
Number of Linecards present = 4
Timestamp check (configured) = enabled
Timestamp check status = disabled
Enable/Disable status
---------------------
User : not disabled
SUP : not disabled
Fabric : not disabled
switch(config)#
Related Commands Command Description
show running-config
ntp
Displays the NTP information.
show ntp statistics Displays the NTP statistics.