B Commands
bloggerd parse log-buffer
28
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
bloggerd parse log-buffer
To parse the log buffers from binary format to ASCII format using DeBlogger, use the bloggerd parse
log-buffer command.
bloggerd parse log-buffer {directory directory-path | file file-name}
Syntax Description
Defaults A threshold-based log dump is enabled for the default VDC.
Command Modes Global configuration mode (config)
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines DeBlogger is an external parsing framework that converts binary data into ASCII format by linking with
the necessary application libraries. You can use the bloggerd parse log-buffer command to parse logs
from binary to ASCII format.
Note We recommend that you use BloggerD only with TAC supervision.
This command does not require a license.
directory
directory-path
Specifies the directory path of file to be parsed by DeBlogger.
file file-name Specifies the filename of file to be parsed by DeBlogger.
Release Modification
6.2(2) This command was introduced.
To Next Page
Loading...
