Cisco Nexus 7000 Series - Page 140

D Commands
destination-profile alert-group
112
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to specify that the destination profile receives all Call home messages:
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# callhome
switch(config-callhome)# destination-profile Noc101 alert-group All
switch(config-callhome)# show callhome destination-profile profile Noc101
Noc101 destination profile information
maximum message size:2500000
message format:XML
message-level:0
email addresses configured:
alert groups configured:
all
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show callhome Displays the Call home configuration.