Cisco Nexus 7000 Series - Page 168

E Commands
ethanalyzer local interface
140
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines Cisco Ethanalyzer is based on the Wireshark open source code.
This command does not require a license.
Examples This example shows how to capture all packets on the mgmt 0 port:
switch# ethanalyzer local interface mgmt
#
Related Commands
Release Modification
4.2(5) and 5.0(1) Added the option capture-ring-buffer to the syntax description.
4.0(1) This command was introduced.
Command Description
ethanalyzer local read Reads the captured packet data from an Ethanalyzer capture.