E Commands
event cli
143
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
2. The delimiter between the modes must be “ ; ”, which is a space followed by a semi-colon and
followed by another space.
This command does not require a license.
Examples This example shows how to specify a CLI command for the EEM applet to match:
switch# configure terminal
switch(config)# event manager applet eventcli-applet
switch(config-applet)# event cli match "write memory.*" time 13
switch(config-applet)#
To Next Page
Loading...
