Cisco Nexus 7000 Series - Page 185

E Commands
event module-failure
157
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Defaults None
Command Modes Embedded event manager
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to specify that an EEM applet runs when a module failure event occurs:
switch# configure terminal
switch(config)# event manager applet modfail-applet
switch(config-applet)# event module-failure type unexpected-registration module 6 count 2
switch(config-applet)#
Release Modification
5.2.(1) Added the tag tag keywords.
4.0(1) This command was introduced.