Cisco Nexus 7000 Series - Page 196

E Commands
event syslog
168
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure a syslog message to monitor when an EEM applet is triggered:
switch# configure terminal
switch(config-applet)# event syslog occurs 10 pattern "authentication failed"
Configuration accepted successfully
This example shows how to remove the syslog message monitor configuration:
switch# configure terminal
switch(config-applet)# event syslog occurs 10 pattern "authentication failed"
Configuration accepted successfully
Related Commands
Release Modification
5.2.(1) Added the tag tag keywords.
5.1(1) This command was introduced.
Command Description
action syslog Configures a syslog message to generate when an Embedded Event
Manager (EEM) applet is triggered.