Cisco Nexus 7000 Series - Page 213

F Commands
filter (SPAN)
185
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Usage Guidelines You can configure filters for ingress or egress SPAN traffic based on a set of rules. A simple filter has
only one rule, and multiple fields or conditions can be added to this rule. The packets are spanned only
if all conditions are met.
Port channel member lane is not supported on F1 Series modules.
F2 and F2e Series modules do not support egress SPAN filtering for destination MAC addresses and
source MAC addresses.
This command does not require a license.
Examples This example shows how to configure filters for an SPAN session:
switch# configure terminal
switch(config)# monitor session 3
switch(config-monitor)# filter vlan 3-5
switch(config-monitor)# filter trace-route true
Related Commands Command Description
filter (ERSPAN) Configures the filters for an ERSPAN session.
show monitor session Displays information about a SPAN or ERSPAN session.