F Commands
flow record
206
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Cisco NX-OS enables the following match fields by default when you create a flow record:
• match interface input
• match interface output
• match flow direction
This command does not require a license.
Examples This example shows how to create a flow record and enter flow record configuration mode:
switch(config)# flow record FLOW-RECORD-1
switch(config-flow-record)#
Related Commands Command Description
clear flow monitor Clears the flow monitor.
flow monitor Creates a flow monitor.
show flow sw-monitor Displays flow monitor status and statistics.
To Next Page
Loading...
