Cisco Nexus 7000 Series - Page 265

L Commands
lldp tlv-select
237
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Examples This example shows how to enable the system capabilities TLV:
switch(config)# lldp tlv-select system-capabilities
switch(config)#
This example shows how to disable the system capabilities TLV:
switch(config)# no lldp tlv-select system-capabilities
switch(config)#
Related Commands Command Description
show lldp tlv-select Displays the LLDP TLV configuration.
show lldp dcbx
interface ethernet
Displays the local DCBX control status.