Cisco Nexus 7000 Series - Page 30

A Commands
abort (Call home)
2
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
abort (Call home)
To delete a Call home Cisco Fabric Services (CFS) configuration session without applying the
configuration, use the abort command.
abort
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Call home configuration
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines The abort command is supported only on the device where the CFS fabric lock is acquired.
This command does not require a license.
Examples This example shows how to abort a Call home CFS configuration session:
switch(config-callhome)# abort
switch(config-callhome)# show callhome session status
Last Action Time Stamp : Mon Dec 22 17:34:37 2008
Last Action : Abort
Last Action Result : Success
Last Action Failure Reason : none
Related Commands
Release Modification
4.1(2) This command was introduced.
Command Description
show session status Displays the status of the current CFS configuration session, including the
last action and its result.
callhome Enters the Call home configuration mode.
callhome distribute Enables CFS distribution of the Call home configuration.