P Commands
ptp vlan
344
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Related Commands Command Description
ptp Enables or disables PTP on an interface.
ptp announce Configures the interval between PTP announce messages on an interface
or the number of PTP intervals before a timeout occurs on an interface.
ptp delay-request
minimum interval
Configures the minimum interval allowed between PTP delay-request
messages when the port is in the master state.
ptp sync interval Configures the interval between PTP synchronization messages on an
interface.
To Next Page
Loading...
