Cisco Nexus 7000 Series - Page 385

R Commands
rmon event
357
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Examples This example shows how to configure RMON event 2 to log the onboard RMON log and send an SNMP
trap to public community trap destinations:
switch# config terminal
switch(config)# rmon event 2 log trap public description CriticalErrors owner cisco
switch#
Related Commands Command Description
rmon alarm Configures a 32-bit RMON alarm.
rmon hcalarm Configures a 64-bit RMON alarm.
show rmon Displays RMON configuration and logging information.