Cisco Nexus 7000 Series - Page 409

S Commands
snmp-server enable traps
381
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Defaults License and SNMP authentication notifications are enabled.
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to enable BGP notifications:
switch# configure terminal
switch(config) snmp-server enable traps bgp
Related Commands
Release Modification
4.0(1) This command was introduced.
4.0(2) Added the OSPF rate-limit keyword.
4.0(3) Added the eigrp keyword.
5.0(2) Added the cfs, config, feature-control, rmon, and zone keywords.
Command Description
show snmp trap Displays the enable or disable state of all SNMP notifications.