Cisco Nexus 7000 Series - Page 455

Show Commands
show callhome
427
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Examples This example shows how to display the status of the last CFS operation for the Call Home application:
switch# show callhome last action status
Last Action Time Stamp : None
Last Action : None
Last Action Result : None
Last Action Failure Reason : none
This example shows how to display the Call Home destination profile named Noc101:
switch# show callhome destination-profile profile Noc101
Noc101 destination profile information
maximum message size:2500000
message format:XML
message-level:0
email addresses configured:
alert groups configured:
all
This example shows how to display the Call Home configuration:
switch# show callhome
callhome enabled
Callhome Information:
contact person name(sysContact):who@where
contact person's email:someone@noc.com
contact person's phone number:+1-408-555-9918
street addr:425 E Street, Anytown, CA 95999
site id:8
customer id:987654
contract id:456789
switch priority:7
duplicate message throttling : enabled
periodic inventory : enabled
periodic inventory time-period : 7 days
periodic inventory timeofday : 08:00 (HH:MM)
Distribution : Enabled
Related Commands Command Description
callhome test Sends a test message to all configured destinations.
callhome send Sends the specified Call Home test message to all configured destinations.
callhome Places you into the CLI call Home configuration mode.
show cfs status Displays the status of CFS distribution on the device as well as IP
distribution information.
show tech-support cfs Displays information about the CFS configuration required by technical
support when resolving a CFS issue.
show logging level cfs Displays the CFS logging configuration.