Cisco Nexus 7000 Series - Page 520

Show Commands
show hardware capacity
492
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Examples This example shows how to display information about the hardware capabilities and current hardware
utilization by the system:
switch(config)# show hardware capacity module
Supervisor Redundancy HW Mode(Dual-SUPs): Disabled
Redundancy mode: Active with no standby
Switching Resources:
-------------------
Module Model Number Part Number Serial Number
---------------------------------------------------------
7 N7K-M148GS-11 73-11584-02 JAF1219AGFE
10 N7K-SUP1 73-10877-11 JAF1307ALAT
12 NURBURGRING 73-10098-04 JAB104400P0
XBAR Resources:
-------------------
XbarNum Model Number Part Number Serial Number
---------------------------------------------------------
1 N7K-C7018-FAB-1 73-11687-01 JAF1225AGHJ
Flash/NVRAM Resources:
------------------------------------------------------------
Usage: Module Device Total(KB) Free(KB) %Used
------------------------------------------------------------
10 bootflash 1762048 1383980 21
10 logflash 7997912 6840772 14
10 slot0 2026608 1985436 2
switch(config)#
Related Commands Command Description
show hardware
fabric-utilization
Displays information about fabric utilizations.
show module Displays information about a module.