Cisco Nexus 7000 Series - Page 544

Show Commands
show interface ethernet counter detailed
516
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show interface ethernet counter detailed
To display the only nonzero counters, use the show interface ethernet counter detailed command.
show interface ethernet slot/chassis counter detailed
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the only nonzero counters:
switch# show interface ethernet 10/25 counters detailed
Ethernet10/25
Rx Packets: 3635
Rx Unicast Packets: 9788
Rx Multicast Packets: 3631
Rx Bytes: 1062103
Rx Packets from 128 to 255 bytes: 1211
Rx Packets from 256 to 511 bytes: 2420
Rx Packets from 1024 to 1518 bytes: 4
Tx Packets: 39883
Tx Unicast Packets: 9788
Tx Multicast Packets: 39879
Tx Bytes: 3731578
Tx Packets from 65 to 127 bytes: 36247
Tx Packets from 128 to 255 bytes: 1211
Tx Packets from 256 to 511 bytes: 2421
Tx Packets from 1024 to 1518 bytes: 4
Non Fcoe in packets: 13419
Non Fcoe in octets: 2392727
Non Fcoe out packets: 39883
Non Fcoe out octets: 3731578
Tx LPI usecs 74304694529
slot/chassis Slot or chassis number.The range is from 1 to 253.
Release Modification
6.1(2) This command was introduced.