Cisco Nexus 7000 Series - Page 629

Show Commands
show ptp clock
601
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ptp clock
To display the Precision Time Protocol (PTP) clock information, use the show ptp clock command.
show ptp clock
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the PTP clock information:
switch# show ptp clock
PTP Device Type: Boundary clock
Clock Identity : 0:18:ba:ff:ff:d8: e:17
Clock Domain: 0
Number of PTP ports: 2
Priority1 : 255
Priority2 : 255
Clock Quality:
Class : 248
Accuracy : 254
Offset (log variance) : 65535
Offset From Master : 0
Mean Path Delay : 0
Steps removed : 1
Local clock time:Sun Jan 15 20:57:29 2011
Release Modification
5.2(1) This command was introduced.