Cisco Nexus 7000 Series - Page 639

Show Commands
show ptp time-property
611
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ptp time-property
To display the Precision Time Protocol (PTP) clock properties, use the show ptp time-property
command.
show ptp time-property
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the PTP clock properties:
switch# show ptp time-property
PTP CLOCK TIME PROPERTY:
Current UTC Offset valid: 0
Current UTC Offset: 33
Leap59: 0
Leap61: 0
Time Traceable: 0
Frequency Traceable: 0
PTP Timescale: 0
Time Source: 0xA0(internal Osccilator)
Related Commands
Release Modification
5.2(1) This command was introduced.
Command Description
show ptp brief Displays the PTP status.
show ptp clock Displays the properties of the local clock.
show ptp clocks
foreign-masters-record
Displays the state of foreign masters known to the PTP process.