Cisco Nexus 7000 Series - Page 669

Show Commands
show snmp group
641
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Examples This example shows how to display the SNMP groups:
switch(config)# show snmp group
role: network-admin
description: Predefined network admin role has access to all commands
on the switch
-------------------------------------------------------------------
Rule Perm Type Scope Entity
-------------------------------------------------------------------
1 permit read-write
role: network-operator
description: Predefined network operator role has access to all read
commands on the switch
-------------------------------------------------------------------
Rule Perm Type Scope Entity
-------------------------------------------------------------------
1 permit read
role: vdc-admin
description: Predefined vdc admin role has access to all commands within
a VDC instance
-------------------------------------------------------------------
Rule Perm Type Scope Entity
-------------------------------------------------------------------
1 permit read-write
role: vdc-operator
description: Predefined vdc operator role has access to all read commands
within a VDC instance
-------------------------------------------------------------------
Rule Perm Type Scope Entity
-------------------------------------------------------------------
1 permit read
Related Commands Command Description
role name Configures security roles used as SNMP groups.