Cisco Nexus 7000 Series - Page 677

Show Commands
show snmp user
649
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Examples This example shows how to display the SNMP users:
switch(config)# show snmp user
______________________________________________________________
SNMP USERS
______________________________________________________________
User Auth Priv(enforce) Groups
____ ____ _____________ ______
foo md5 aes-128(no) network-operator
vdc-admin
network-admin
User3 md5 no network-operator
admin md5 des(no) network-admin
user1 md5 des(no) vdc-admin
______________________________________________________________
NOTIFICATION TARGET USERS (configured for sending V3 Inform)
______________________________________________________________
User Auth Priv
____ ____ ____
foo md5 no
(EngineID 11:22:33:44:55)
Related Commands Command Description
snmp-server user Configures SNMP users.