DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
132
Parameters
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
all - Specify that all the IP interfaces will be used.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the IP interface for IPv6 link local automatic:
DGS-3000-26TC:admin#enable ipif_ipv6_link_local_auto newone
Command: enable ipif_ipv6_link_local_auto newone
Success.
disable ipif_ipv6_link_local_auto 10-20
Description
This command is used to disable the auto configuration of link local address when no IPv6 address
are configured.
Format
disable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Parameters
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
all - Specify that all the IP interfaces will be used.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the IP interface for IPv6 link local automatic:
To Next Page
Loading...
