DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
133
DGS-3000-26TC:admin#disable ipif_ipv6_link_local_auto newone
Command: disable ipif_ipv6_link_local_auto newone
Success.
show ipif_ipv6_link_local_auto 10-21
Description
This commands is used to display the link local address automatic configuration state.
Format
show ipif_ipv6_link_local_auto {<ipif_name 12>}
Parameters
<ipif_name 12> - (Optional) Enter the Ip interface name used here. This name can be up to 12
characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
T o display the link local address automatic configuration state.
DGS-3000-26TC:admin#show ipif_ipv6_link_local_auto
Command: show ipif_ipv6_link_local_auto
IPIF: System Automatic Link Local Address: Disabled
To Next Page
Loading...
