DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
15
DGS-3000-26TC:admin#show command_history
Command: show command_history
? ping
login
show serial_port
show session
? config bpdu_protection ports
? reset
? create account
? create ipif
show
the
?
config command_history 2-11
Description
This command is used to configure the number of commands that the Switch can recall. The
Switch “remembers” upto the last 40 commands you entered.
Format
config command_history <value 1-40>
Parameters
<value 1-40> - Enter the number of commands that the Switch can recall. This value must be
between 1 and 40.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the number of command history:
DGS-3000-26TC:admin#config command_history 25
Command: config command_history 25
Success.
To Next Page
Loading...
