DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
188
<portlist> - Enter the list of ports used for this configuration here.
rx - (Optional) Specify to clear the RX counter.
tx - (Optional) Specify to clear the TX counter. If not specified, both of them will be cleared.
rx - (Optional) Specify to clear the RX counter.
tx - (Optional) Specify to clear the TX counter. If not specified, both of them will be cleared.
ccm - (Optional) Specify the CCM RX counters.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To clear the CFM packet’s RX/TX counters:
DGS-3000-26TC:admin#clear cfm pkt_cnt
Command: clear cfm pkt_cnt
Success.
DGS-3000-26TC:admin#clear cfm pkt_cnt ccm
Command: clear cfm pkt_cnt ccm
Success.
To Next Page
Loading...
