D-Link DGS-3000 - Page 199

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
195
DGS-3000-26TC:admin#config cpu access_profile profile_id 1 add access_id 1 ip
vlan default source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11
code 32 port 1 deny
Command: config cpu access_profile profile_id 1 add access_id 1 ip vlan default
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 port 1
deny
Success.
DGS-3000-26TC:admin#
enable cpu interface filtering 17-4
Description
This command is used to enable CPU interface filtering control.
Format
enable cpu_interface_filtering
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To enable CPU interface filtering:
DGS-3000-26TC:admin#enable cpu_interface_filtering
Command: enable cpu_interface_filtering
Success.
DGS-3000-26TC:admin#
disable cpu interface filtering 17-5
Description
This command is used to disable CPU interface filtering control.
Format
disable cpu_interface_filtering