DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
208
Example
To enabled the DHCPv6 server packet sending debug:
DGS-3000-26TC:admin# debug dhcpv6_server packet sending state enable
Command: debug dhcpv6_server packet sending state enable
Success.
debug dhcpv6_server state disable 18-14
Description
This command is used to disable the DHCPv6 server debug function.
Format
debug dhcpv6_server state disable
Parameters
None.
Restrictions
Only Administrators can issue this command.
Example
To disabled the DHCPv6 server debug function:
DGS-3000-26TC:admin# debug dhcpv6_server state disable
Command: debug dhcpv6_server state disable
Success.
debug dhcpv6_server state enable 18-15
Description
This command is used to enable the DHCPv6 server debug function.
Format
debug dhcpv6_server state enable
To Next Page
Loading...
