DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
215
enable dhcp_local_relay 19-6
Description
This command is used to globally enable the DHCP local relay function on the Switch.
Format
enable dhcp_local_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the DHCP local relay function:
DGS-3000-26TC:admin#enable dhcp_local_relay
Command: enable dhcp_local_relay
Success.
disable dhcp_local_relay 19-7
Description
This command is used to globally disable the DHCP local relay function on the Switch.
Format
disable dhcp_local_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the DHCP local relay function:
To Next Page
Loading...
