DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
216
DGS-3000-26TC:admin#disable dhcp_local_relay
Command: disable dhcp_local_relay
Success.
show dhcp_local_relay 19-8
Description
This command is used to display the current DHCP local relay configuration.
Format
show dhcp_local_relay
Parameters
None.
Restrictions
None.
Example
To display local DHCP relay status:
DGS-3000-26TC:admin#show dhcp_local_relay
Command: show dhcp_local_relay
DHCP/BOOTP Local Relay Status : Disabled
DHCP/BOOTP Local Relay VID List : 1
DHCP Relay Agent Information Option 82 Circuit ID : Default
DHCP Relay Agent Information Option 82 Remote ID : D-Link L2Switch
show dhcp_local_relay option_82 ports 19-9
Description
This command is used to display the current DHCP local relay option 82 configuration of each port.
To Next Page
Loading...
