D-Link DGS-3000 - Page 230

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
226
only use the first 128 bytes.
F22: Slash (/).
F23: ASCII format string ‘0’.
F24: Slash (/).
F25: ASCII format string ‘0’.
F26: Slash (/).
F27: Chassis ID. This value is the same as F11.
F28: Slash (/).
F29: ASCII format string ‘0’.
F30: Slash (/).
F31: Port number. The incoming port number of DHCP client packets. ASCII format
string.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the circuit ID as default:
DGS-3000-26TC:admin#config dhcp_relay option_82 circuit_id default
Command: config dhcp_relay option_82 circuit_id default
Success.
DGS-3000-26TC:admin#
enable dhcp_relay 20-8
Description
This command is used to enable the DHCP relay function on the Switch.
Format
enable dhcp_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the DHCP relay function.