DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
227
DGS-3000-26TC:admin#enable dhcp_relay
Command: enable dhcp_relay
Success.
disable dhcp_relay 20-9
Description
This command is used to disable the DHCP relay function on the Switch.
Format
disable dhcp_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the DHCP relay function:
DGS-3000-26TC:admin#disable dhcp_relay
Command: disable dhcp_relay
Success.
show dhcp_relay 20-10
Description
This command is used to display the current DHCP relay configuration.
Format
show dhcp_relay {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specify the IP interface name.
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12
To Next Page
Loading...
