D-Link DGS-3000 - Page 264

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
260
Format
config dhcp pool option_43 <pool_name 12> [add string <multiword 255> | delete]
Parameters
<pool_name 12> - Enter the DHCP pool name here. This name can be up to 12 characters long.
add - Specify to add an option profile to the DHCP pool, configured on this Switch.
string – Specify the DHCP pool option_43 string variable.
<multiword 255> - Enter a multiword 255 long character ASCII string.
delete - Specify to delete an option profile from a DHCP pool, configured on this switch.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add an option profile for DHCP option 43 in pool1:
DGS-3000-26TC:admin#config dhcp pool option_43 pool1 add profile1
Command: config dhcp pool option_43 pool1 add profile1
Success.
DGS-3000-26TC:admin#
To delete an option profile from a DHCP pool:
DGS-3000-26TC:admin#config dhcp pool option_43 pool1 delete profile1
Command: config dhcp pool option_43 pool1 delete profile1
Success.
DGS-3000-26TC:admin#
config dhcp pool option_profile 21-24
Description
This command is used to apply an option profile to a specific DHCP pool.
Format
config dhcp pool option_profile <pool_name 12> [add | delete] <profile_name 12>
Parameters
<pool_name 12> - Enter the DHCP pool name here. This name can be up to 12 characters long.
add - Specify to add an option profile to a DHCP pool, configured on this switch.
delete - Specify to delete an option profile from a DHCP pool, configured on this switch.