DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
261
<profile_name 12> - Enter the DHCP server option profile name here. This name can be up to
12 characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add an option profile for DHCP profile1 in pool1:
DGS-3000-26TC:admin#config dhcp pool option_profile pool1 add profile1
Command: config dhcp pool option_profile pool1 add profile1
Success.
To delete an option profile from a DHCP pool:
DGS-3000-26TC:admin#config dhcp pool option_profile pool1 delete profile1
Command: config dhcp pool option_profile pool1 delete profile1
Success.
config dhcp pool class 21-25
Description
This command is used to configure the address range of a specific DHCP pool class. User can
only configure one address range per DHCP class.
Format
config dhcp pool
class <pool_name 12> [add | delete] <
c
lass_na
m
e 12
> {begin_address <ipaddr> end_address <ipaddr>}
Parameters
<pool_name 12> - Enter the DHCP pool name.
add - Add an address range to the Switch’s DHCP pool class table.
delete - Delete an address range to the Switch’s DHCP pool class table.
<class_name12> - Enter DHCP class’s name. The class must be created through the create
dhcp class command.
begin_address - (Optional) The beginning IP address of the range.
<ipaddr> - (Optional) Enter the IP address.
end_address - (Optional) The end IP address of the range
<ipaddr> - Enter the IP address.
To Next Page
Loading...
