DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
286
disable dhcpv6_relay 23-2
Description
This command is used to disable the DHCPv6 relay function on the Switch.
Format
disable dhcpv6_relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the DHCPv6 relay global state to disable:
DGS-3000-26TC:admin# disable dhcpv6_relay
Command: disable dhcpv6_relay
Success.
enable dhcpv6_local_relay 23-3
Description
This command is used to enable the DHCPv6 local relay function of the Switch.
Format
enable dhcpv6_local_relay
Parameters
None.
Restrictions
Only Administrators and Operators can issue this command.
Example
To configure the DHCPv6 local relay global state to enable:
To Next Page
Loading...
