D-Link DGS-3000 - Page 310

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
306
Format
enable dhcpv6_server
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the DHCPv6 server global state to enable:
DGS-3000-26TC:admin# enable dhcpv6_server
Command: enable dhcpv6_server
Success.
DGS-3000-26TC:admin#
disable dhcpv6_server 24-13
Description
This command is used to disable the DHCPv6 server function on the Switch.
Format
disable dhcpv6_server
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the DHCPv6 server global state to disable: