D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
307
DGS-3000-26TC:admin# disable dhcpv6_server
Command: disable dhcpv6_server
Success.
DGS-3000-26TC:admin#
show dhcpv6_server 24-14
Description
This command is used to display the DHCPv6 server setting.
Format
show dhcpv6_server {ipif <ipif_name 12>}
Parameters
ipif - (Optional) Specify the IP interface name to be displayed.
<ipif_name 12> - Enter the IP interface name to be displayed here. This name can be up to
12 characters long.
Restrictions
None.
Example
To display the DHCPv6 server setting:
DGS-3000-26TC:admin# show dhcpv6_server
Command: show dhcpv6_server
DHCPv6 Server Global State: Disabled
---------------------------------------------------------------
IP Interface : System
DHCPv6 Server State : Enabled
IP Interface : ipif1
DHCPv6 Server State : Enabled
Total Entries : 2
DGS-3000-26TC:admin#