D-Link DGS-3000 - Page 313

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
309
show dhcpv6 excluded_address 24-16
Description
This command is used to display the groups of IPv6 addresses which are excluded from the legal
assigned IPv6 address
Format
show dhcpv6 excluded_address {<pool_name 12>}
Parameters
<pool_name 12> - (Optional) Enter the DHCPv6 pool name used here. This name can be up to
12 characters long.
Restrictions
None.
Example
To display the excluded address information:
DGS-3000-26TC:admin# show dhcpv6 excluded_address
Command: show dhcpv6 excluded_address
Pool Name: net100
Range 1
Begin Address: 3000:110:1::1
End Address : 3000:110:1::7
Range 2
Begin Address: 3000:110:1::9
End Address : 3000:110:1::9
Range 3
Begin Address: 3000:110:1::11
End Address : 3000:110:1::11
Range 4
Begin Address: 3000:110:1::13
End Address : 3000:110:1::13
Total Entries : 5
DGS-3000-26TC:admin#
config dhcpv6_server ipif 24-17
Description
This command is used to configure the DHCPv6 Server state per interface.