D-Link DGS-3000 - Page 328

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
324
DGS-3000-26TC:admin#delete host_name www.example.com
Command: delete host_name www.example.com
Success.
DGS-3000-26TC:admin#
show host_name 27-7
Description
This command is used to display the current host name.
Format
show host_name {static | dynamic}
Parameters
static - (Optional) Specify to display the static host name entries.
dynamic - (Optional) Specify to display the dynamic host name entries.
Restrictions
None.
Example
To display the static and dynamic host name entries:
DGS-3000-26TC:admin#show host_name
Command: show host_name
Static Host Name Table
Host Name : www.example.com
IP Address : 10.10.10.10
Total Static Entries: 1
Dynamic Host Name Table
Total Dynamic Entries: 0
DGS-3000-26TC:admin#