DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
335
Format
create erps raps_vlan <vlanid 1-4094>
Parameters
<vlanid 1-4094> - Enter the VLAN which will be the R-APS VLAN.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create an R-APS VLAN:
DGS-3000-26TC:admin#create erps raps_vlan 4094
Command: create erps raps_vlan 4094
Success.
delete erps raps_vlan 30-4
Description
This command is used to delete an R-APS VLAN on a switch. When an R-APS VLAN is deleted,
all parameters related to this R-APS VLAN will also be deleted. This command can only be issued
when the ring is not active.
Format
delete erps raps_vlan <vlanid 1-4094>
Parameters
<vlanid 1-4094> - Enter the VLAN which will be the R-APS VLAN.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete an R-APS VLAN:
To Next Page
Loading...
