DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
349
DGS-3000-26TC:admin#config filter extensive_netbios 1-10 state enable
Command: config filter extensive_netbios 1-10 state enable
Success.
show filter extensive_netbios 32-4
Description
This command is used to display the extensive netbios state on the Switch.
Format
show filter extensive_netbios
Parameters
None.
Restrictions
None.
Example
To display the extensive_state created on the Switch:
DGS-3000-26TC:admin#show filter extensive_netbios
Command: show filter extensive_netbios
Enabled ports: 1-3
To Next Page
Loading...
