DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
394
Format
config router_ports_forbidden [ <vlan_name 32> | vlanid <vlanid_list> ] [add | delete]
<portlist>
Parameters
<vlan_name 32> - Enter the name of the VLAN on which the router port resides.
vlanid - Specify the ID of the VLAN on which the router port resides.
<vlanid_list> - Enter the VLAN ID list here.
add - Specify to add the router ports.
delete - Specify to delete the router ports.
<portlist> - Enter a range of ports to be configured.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set up port range 1-10 to forbidden router ports of default VLAN:
DGS-3000-26TC:admin#config router_ports_forbidden default add 11-12
Command: config router_ports_forbidden default add 11-12
Success.
enable igmp_snooping 38-7
Description
This command is used to enable IGMP snooping on the Switch.
Format
enable igmp_snooping
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable IGMP snooping on the Switch:
To Next Page
Loading...
