D-Link DGS-3000 - Page 406

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
402
Restrictions
None.
Example
To show IGMP snooping:
DGS-3000-26TC:admin#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Enabled
Data Driven Learning Max Entries : 128
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Disabled
Querier Role : Non-Querier
Querier IP : 0.0.0.0
Querier Expiry Time : 0 secs
State : Disabled
Fast Leave : Disabled
Rate Limit : No Limitation
Report Suppression : Enabled
Version : 3
Data Driven Learning State : Enabled
Data Driven Learning Aged Out : Disabled
Data Driven Group Expiry Time : 260
Total Entries: 1
DGS-3000-26TC:admin#
show igmp_snooping rate_limit 38-17
Description
This command is used to display the IGMP snooping rate limit setting.
Format
show igmp_snooping rate_limit [ports <portlist> | vlanid <vlanid_list>]
Parameters
ports - Specify the port range.
<portlist> - Enter the range of ports here.
vlanid - Specify the VLAN range..
<vlanid_list> - Enter the VLAN ID list here.