D-Link DGS-3000 - Page 424

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
420
delete address_binding ip_mac 39-6
Description
This command is used to delete an IMPB entry.
Format
delete address_binding ip_mac [all | ipaddress <ipaddr> mac_address <macaddr> |
ipv6address <ipv6addr> mac_address <macaddr>]
Parameters
all - Specify that all the MAC address will be used.
ipaddress - Specify the learned IP address of the entry in the database.
<ipaddr> - Enter the IP address used.
mac_address - Specify the MAC address used for this configuration.
<macaddr> - Enter the MAC address used.
ipv6address - Specify the learned IPv6 address of the entry in the database.
<ipv6addr> - Enter the IPv6 address used.
mac_address - Specify the MAC address used for this configuration.
<macaddr> - Enter the MAC address used.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a specified IMPB entry:
DGS-3000-26TC:admin#delete address_binding ip_mac ipaddress 10.1.1.1
mac_address 00-00-00-00-00-11
Command: delete address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-
00-00-11
Success.
DGS-3000-26TC:admin#
config address_binding ip_mac ipaddress 39-7
Description
This command is used to update an IMPB entry.
Format
config address_binding ip_mac ipaddress <ipaddr> mac_address <macaddr> {ports
[<portlist> | all]}