EasyManua.ls Logo

D-Link DGS-3000 - Page 423

D-Link DGS-3000
909 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
419
Example
To configure a static IPv6 IMPB entry so that that IPv6 address fe80::240:5ff:fe00:28 is bound to
the MAC address 00-00-00-00-00-11:
DGS-3000-26TC:admin#config address_binding ip_mac ipv6address
fe80::240:5ff:fe00:28 mac_address 00-00-00-00-00-11
Command: config address_binding ip_mac ipv6address FE80::240:5FF:FE00:28
mac_address 00-00-00-00-00-11
Success.
DGS-3000-26TC:admin#
delete address_binding blocked 39-5
Description
This command is used to delete a blocked entry.
Format
delete address_binding blocked [all | vlan_name <vlan_name> mac_address <macaddr>]
Parameters
all - Specify that all the entries the address database that the system has automatically blocked
to be deleted.
vlan_name - Specify the name of the VLAN to which the blocked MAC address belongs.
<vlan_name> - Enter the VLAN name.
mac_address - Specify the MAC address of the entry or the blocked MAC address.
<macaddr> - Enter the MAC address used.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete a blocked address:
DGS-3000-26TC:admin#delete address_binding blocked vlan_name v31 mac_address
00-00-00-00-00-11
Command: delete address_binding blocked vlan_name v31 mac_address 00-00-00-00-
00-11
Success.
DGS-3000-26TC:admin#

Table of Contents