D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
40
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
Used to enable the 802.1X function:
DGS-3000-26TC:admin#enable 802.1x
Command: enable 802.1x
Success.
DGS-3000-26TC:admin#
disable 802.1x 4-2
Description
This command is used to disable the 802.1X function.
Format
disable 802.1x
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable the 802.1X function:
DGS-3000-26TC:admin#disable 802.1x
Command: disable 802.1x
Success.
DGS-3000-26TC:admin#
create 802.1x user 4-3
Description
This command is used to create an 802.1X user.