DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
41
Format
create 802.1x user <username 15>
Parameters
<username 15> - Enter the username to be added. This value can be up to 15 characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a 802.1x user “test”:
DGS-3000-26TC:admin#create 802.1x user test
Command: create 802.1x user test
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
delete 802.1x user 4-4
Description
This command is used to delete an 802.1X user.
Format
delete 802.1x user <username 15>
Parameters
<username 15> - Enter the username to be deleted. This value can be up to 15 characters long.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete user “test”:
To Next Page
Loading...
