DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
437
DGS-3000-26TC:admin#no debug address_binding
Command: no debug address_binding
Success.
enable address_binding roaming 39-28
Description
This command is used to enable the IMPB roaming.
Format
enable address_binding roaming
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the IMPB roaming:
DGS-3000-26TC:admin#enable address_binding roaming
Command: enable address_binding roaming
Success.
disable address_binding roaming 39-29
Description
This command is used to disable the IMPB roaming.
Format
disable address_binding roaming
Parameters
None.
To Next Page
Loading...
