DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
450
DGS-3000-26TC:admin#show jwac
Command: show jwac
State : Disabled
Enabled Ports :
Virtual IP/URL : 1.1.1.1/-
Virtual IPv6/URL : ::/-
Switch HTTP Port : 80 (HTTP)
UDP Filtering : Enabled
Forcible Logout : Enabled
Redirect State : Enabled
Redirect Delay Time : 1 Seconds
Redirect Destination : Quarantine Server
Quarantine Server :
Quarantine Server IPv6 :
Q-Server Monitor : Disabled
Q-Server Error Timeout : 60 Seconds
RADIUS Auth-Protocol : PAP
RADIUS Authorization : Enabled
Local Authorization : Enabled
Function Version : 2.11
enable jwac redirect 42-5
Description
This command is used to enable JWAC redirect. When redirect quarantine_server is enabled,
the unauthenticated host will be redirected to a quarantine server when it tries to access a random
URL. When redirect jwac_login_page is enabled, the unauthenticated host will be redirected to
the jwac_login_page on the Switch to finish authentication.
When enable redirect to quarantine server is in effect, a quarantine server must be configured first.
Format
enable jwac redirect
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable JWAC redirect:
To Next Page
Loading...
