DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
451
DGS-3000-26TC:admin#enable jwac redirect
Command: enable jwac redirect
Success.
disable jwac redirect 42-6
Description
This command is used to disable JWAC redirect. When redirect is disabled, only access to
quarantine_server and the jwac_login_page from an unauthenticated host is allowed, all other
Web access will be denied.
Format
disable jwac redirect
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable JWAC redirect:
DGS-3000-26TC:admin#disable jwac redirect
Command: disable jwac redirect
Success.
config jwac redirect 42-7
Description
This command is used to configure redirect destination and delay time before an unauthenticated
host is redirected to the quarantine server or the JWAC login web page. The unit of delay time is
seconds. 0 means no delaying the redirect.
Format
config jwac redirect {destination [quarantine_server | jwac_login_page] | delay_time <sec 0-
10>}(1)
To Next Page
Loading...
